Month: February 2017

Wide box Tiny box List
Ascent Descent

Developing on STM32: introducing ChibiStudio

Developing on STM32: introducing ChibiStudio

In this article we are going to set-up a ready-to-use Eclipse-based toolchain named ChibiStudio for the development on STM32. We will also explore this development toolchain explaining some basic operations necessary for daily development. So we will introduce the ChibiOS project, we will setup ChibiStudio taking a tour of some parts of it, we will import some ready to use projects and perform our first flash and run. Note that to proceed with this tutorial is necessary the installation of ST-Link drivers: this procedure has been shown in the previous article From 0 to continue reading...

From 0 to STM32

From 0 to STM32

Nowadays, we are surrounded by smart objects capable to do incredible things. These objects, known as Smart Things, are now can also communicate over different (wired and wireless) communication channels. The obvious consequence is that these objects are able to get and push data through the Internet: this phenomenon, this network of Smart Things, is commonly known as the Internet of Things or IoT. The spreading of the IoT is substantially due to two main con-causes:

the evolution of Microcontrollers which are increasing their performances while their price is continue reading...

Testing a WeSU in everyday life

In this article, we will use a WeSU in some daily common scenarios. In this way, we will propose some case of use of wearable device, testing also its mechanical robustness and its sensitivity.

For our tests we will use the remote data capture feature provided by the smartphone app: this is very useful because it allows to save data and send them to an email address allowing offline post processing. Before starting each test, we need to pair WeSU and our smartphone using bluetooth: launch the application (ST WeSU) then click on START SCANNING (see Fig. 1).

If the continue reading...

Detecting obstacles using an ultrasonic sensor HC-SR04

Detecting obstacles using an ultrasonic sensor HC-SR04

HC-SR04 is a commonly used ultrasonic sensor which is capable to detect obstacles in a range of 2-300cm. The sensor looks like a small PCB having two metal cylinders on the front-side and a small circuit on the back-side (see Fig.1).

In this article we will provide a simple demo to use HC-SR04. This requires a preliminary read of the sensor user manual: HC-SR04 User Manual

The sensor has 4 PIN:

VCC, which must be connected to 5V; Trig, which is an input PIN to trigger the measurement; Echo, which is an output PIN which sent out a square wave; GND, which must be continue reading...

How to drive a HD44780 with I2C backpack with a STM32

How to drive a HD44780 with I2C backpack with a STM32

The HD44780 is a de-facto standard controller for display. We have already use it providing a source code to use a 16×2 LCD with a STM32. In this article we will step over introducing an I2C backpack for that display. Of course we will explain how to edit old code in order to get it work with this new hardware configuration.

Even if it is still popular, this controller was made commercially available in the late eighties. At that time serial communications were not so widespread because their were costly and involved constraint about clock speed. Because of that, the continue reading...